5 Common Water Softener Issues That You May Face

Water Softener Issues

Water softeners are usually reliable when it boils down to filtering and purifying your water supply. However, they won’t last forever even though they’re designed to serve you longer. You’ll face issues with the softening system from time to time. It’s necessary to be careful about these issues so that you can fix them as and when the problem arises. Here are 5 common water softener issues that you may face.


Clogging or blockage is one of the common issues faced by people who use a water softener. These blockages pile up as a result of minerals that get collected in the interior of the device. When the minerals build up to a particular point, they hardly leave any room for water passage. If you find that the degree of water softening has gone down, it may be an indication of blockage lines. Fixing blockages isn’t really difficult. Just go through the user manual of the device, and you’ll find a solution to get rid of the problem quickly.

Resin beads

If the water softener is driven by salt, it makes use of resin beads. The resin beads are essential for the smooth functioning of the softener. They replace hard minerals with soft ones, and soften the water. Although these beads are meant to last throughout the lifespan of the system, they’re likely to fail in some situations. When this happens, you’ll see resin beads floating in the water of the softener. Fixing this issue warrants professional help.

Motor failures

Like any other appliance that uses a motor, water softeners are subjected to motor failures. The motor of any device is vital for its correct working, and the motor in a water softener isn’t an exception to this. When the appliance fails to start at all, it’s likely that the motor is having an issue. However, before you conclude repairing or replacing the motor, make sure to check all the cables. If the cables aren’t damaged, it might be the right time to call a serviceman or the manufacturer to repair or replace the motor.

Salt bridges

In some situations, the tank of the softener will be inundated with a crusty, hard material that prevents the flow of water. Such a problem pops up because of high humidity or due to the addition of too much salt to the softener. This crusty material forms a line, which is called a salt bridge. You can use a stick and thrust down into the softener to get rid of the bridge. However, hiring a professional repairer is a better bet to ensure your softener’s mechanical system doesn’t get damaged by a do it yourself repair.

Brine line

A water softener needs accurate pressure to work correctly along the brine line. The brine line is an essential factor for any water softening system. However, problems mostly occur on the brine line. This problem can be easily solved by reddening the brine line. All you’ve to do is check the injector and the filters screen. If you find any defect or problem, replace it.

Bottom line

Keeping the water softening system in good condition is essential for its efficient working. However, the system may encounter problems from time to time. So check these 5 common water softener issues that you may face and take suitable steps to repair them.

Leave a Reply

Your email address will not be published. Required fields are marked *